Euclid

This script generates six different Euclidean rhythms, one on each output. The length, number of steps, and rotation of each pattern can be independently adjusted.

I/O Assignments

ain: external CV control (if configured)
din: external clock input
b1: manual clock input
b2: Menu navigation
k1: manual CV control (if configured)
k2: Channel select, menu navigation
cv1 to cv6: euclidean rhythm outputs

Long-pressing B2 will switch between the visualization and menu mode. While in menu mode, K2 will scroll through the available menu options. Short-press B2 to edit a setting, rotate K2 to choose the desired value, then press B2 again to apply it.

All settings can be assigned either Knob or AIN as their value. When so-assigned, rotating K1 or applying voltage to AIN will automatically select a valid option from the setting. e.g. setting CV1’s Pulses setting to AIN will allow voltage sent to AIN to choose the number of pulses generated by CV1.

Settings

Steps: the number of steps in the pattern (1-32)
Pulses: the number of pulses in the pattern (0-steps)
Rotation: rotate the pattern a set number of steps (0-steps)
Skip %: The probability that any given pulse will be skipped

Defaults

The script will initialize the six outputs with the following patterns by default:

CV1: 8 steps, 5 pulses
CV2: 16 steps, 7 pulses
CV3: 16 steps, 11 pulses
CV4: 32 steps, 9 pulses
CV5: 32 steps, 15 pulses
CV6: 32 steps, 19 pulses

The default patterns all have the rotation and skip set to zero.

The defaults can be edited through the settings menu, with any custom settings re-applied automatically when the script restarts.

Screensaver

After 20 minutes the screen will automatically go blank. Pressing either button or rotating either knob will wake the screen up and return to the channel menu.