Skip to content
EuroPi Contrib Docs

Noddy Holder

Noddy Holder

Section titled “Noddy Holder”

Cum On Feel the Noize! Two channels of sample/track and hold based on a single trigger and CV source.

Digital in is a gate, Analog in is arbitrary CV.

Output 1 is the original gate, Output 2 is S&H based on gate and CV, Ouput 3 is T&H based on gate and CV.

Outputs 4, 5 and 6 are similar, but with the gate inverted.

Controls

Section titled “Controls”

  • digital_in: sample/track trigger input

  • analog_in: CV input to sample or track

  • knob_1: not used

  • knob_2: not used

  • button_1: not used

  • button_2: not used

  • output_1: copy of din gate signal

  • output_2: s&h based on gate

  • output_3: t&h based on gate

  • output_4: inverted gate

  • output_5: s&h based on inverted gate

  • output_6: t&h based on inverted gate

Controls

Section titled “Controls”
  1. There are no controls. Noddy doesn’t listen to The Man.

Details

Section titled “Details”

Sample & Hold: When gate goes HIGH, CV is sampled, and the resulting value is output until the gate goes HIGH again and we re-sample.

Track & Hold: When gate is HIGH, CV input is mirrored to the output. When gate goes LOW, CV is sampled and the resulting value is output until the gate goes HIGH again.

Credits:

Section titled “Credits:”