Set Timer

Set Timer

Set Timer is a simple manual or CV controlled clock/stopwatch to help track how long you’ve been playing or recording.

Inputs & Outputs

• din: Start/stop input. See configuration, below.
• ain: Split trigger.
• b1: Start/stop button.
• b2: Split/reset button. Will reset when stopped, or start a new split timer when running.
• k1-2: Unused.
• cv1: High when the timer is running, low when stopped.
• cv2: Outputs a 10ms trigger every time a new split timer starts.
• cv3-6: Unused.

Configuration

The operating mode of the CV input to the timer can be set by creating/editing config/SetTimer.json:

{
    "MODE": "gate"
}

The MODE field can be set to either gate (default) or trigger:

• gate: The timer starts on the rising edge of the input signal and stops on the falling edge.
• trigger: The timer responds to the rising edge of the input signal and will toggle between starting or stopping.

Patching Suggestions

Connect our master clock’s on/off output to din to start/stop the clock automatically. Connect the trigger output on cv2 to a sequencer or switch to coordinate changes at the same time you start a new split.